|
1
|
These rules have been established to maintain the cleanliness of the centrifuge room and to ensure the efficiency and safety of centrifuge operation.
|
|
2
|
The centrifuge room is regulated by an access control system, only registered users are permitted to access the centrifuge room with their ID card. |
|
3
|
Please close the centrifuge chamber while precooling. |
|
4
|
We provide a refrigerator that is specific for rotor pre-cooling purposes at the Centrifuge Room. All rotor usages should be properly registered and logged. |
|
5
|
The rotor must be BALANCED before running. Please ensure that the sample buckets positioned opposite each other in the rotor are of equal weights. |
|
6
|
Tubes must be at least 90% full. |
|
7
|
If users are more than 15 minutes late for their appointment, the registration will be deemed cancelled. |
|
8
|
Do not leave the centrifuge until the full operating speed is achieved. If any abnormality is detected, please stop immediately and notify the manager (Rm401-5). |
|
9
|
The centrifuge and rotor should be cleaned and properly stored after use. IT IS STRICTLY PROHIBITED TO BRING ROTORS OUT OF THE CENTRIFUGE ROOM. |
|
10
|
ALL activity on the instruments MUST be logged, including user name, laboratory number, rotor type, speed and time. |
|
11
|
Be sure that all equipment and work areas are carefully cleaned; EVERYTHING you may have brought into the lab, such as gloves, tubes, tips, samples, papers and bottles should be cleared away.
|
|
12
|
Anyone who violates the above regulations will have their name publically displayed and their PI will be informed of the violation. |